Browse Our Catalog

Workholding Collets - On Sale Now! Save up to 8%


On Sale! Up to 8% off on Workholding Collets at Liberty Daily News. Top brands include Accusize Industrial Tools, Techniks, CME, HHIP, Hardinge, Panavise, Happybuy, All Industrial, LittleMachineShop.com, & tpactools. Hurry! Limited time offers. Offers valid only while supplies last.



AccusizeTools - Metric ER Collets 13 Pcs/Set ER-11 Collet Sizes 1 to 7mm by 0.5mm in Fitted Strong Aluminum Box, 3350-0581
By Accusize Industrial Tools
In Stock
$79.20

mpn: 3350-0581,

4.4 out of 5 stars with 15 reviews
Size from 1 mm to 7 mm by 0.5 mm. Range of 0.039''. Total 13 ps/set.Made from alloy spring steel and hardened to HRC 44-48All collets had runouts individually checked on 4 points on a testing rodFor size 3.0mm and larger the runout is 0.0003'' (0.008mm). Under size 3.0mm the runout is 0.00059'' (0.015mm).In fitted strong Aluminium BoxSize from 1 mm to 7 mm by 0.5 mm. Range of 0.039''. Total 13 ps/set.. Made from alloy spring steel and hardened to HRC 44-48. All collets are checked its runout


TECHNIKS 18 PIECE ER32 METRIC COLLET SET 3MM - 20MM X 1MM CNC CHUCK .0002"
By Techniks
In Stock
$205.00
$204.99

mpn: 04205MS, ean: 0647829663124,

4.7 out of 5 stars with 17 reviews
TECHNIKS 18 PIECE ER32 METRIC COLLET SET 3MM - 20MM X 1MM CNC CHUCK .0002''Our Part # TEC-04205MS. Set includes sizes 3mm thru 16mm x 1mm (clamping range .079'' - .787''. The most accurate ER32 collet in the industry- average 0.0002'' Total Indicated Runout (T.I.R.)!. Precision ground and hand inspected. Only the very best materials and grinding techniques used!.


8" Base Adapter Plate Mount Chucks on Rotary Table or milling Machine #in-ADP-8
By CME
In Stock
$74.00

mpn: IN-ADP-8,

4.8 out of 5 stars with 50 reviews
8'' base adapter plate is ideal to use on 8'' rotary tables of either 3 or 4 slots to mount either 6'' 3-jaw ,6-jaw or 4-jaw self-centering lathe chucks. This base adapter plate can also be used on milling, drilling machines if you remove the MT3 stub on the center of the plate. Morse taper 3 stub on the center of plate to fit 8'' rotary tables and guarantee proper TIR accuracy. 4pcs 3/4'' table slots T-nuts and 10mm bolts included for mounting the plate. Made of tough and strong illuminum


AccusizeTools - Metric ER Collet 2mm to 16mm by 1mm ER-25 Collet 15 Pcs/Set in Fitted Strong Aluminium Box, 3350-0584
By Accusize Industrial Tools
In Stock
$126.00

mpn: 3350-0584,

4.1 out of 5 stars with 42 reviews
Metric ER Collet 2mm to 16mm by 1mm ER-25 Collet 15 Pcs/Set in Fitted Strong Aluminium Box, #3350-0584 Size from 2 mm to 16 mm by 1 mm Total 15 ps/set Features Range of 0.039'' Made from alloy spring steel and hardened to HRC 44-48 All collets are checked its runout individually on 4 points on a testing rod For size 3.0mm and larger the runout is 0.0003'' (0.008mm) Under size 3.0mm the runout is 0.00059'' (0.015mm) In fitted strong Aluminium BoxSize from 2 mm to 16 mm by 1 mm. Range of 0.039''.


125MM Diameter, D1-3 ER-40 Collet Chuck (3901-5041)
By HHIP
In Stock
$136.55

mpn: 3901-5041, ean: 0769053090719,

4.5 out of 5 stars with 32 reviews
HHIP D1-3 ER-40 Collet Chuck is use with ER-40 collets Concentricity is . 0008''. 125MM diameter (D1). Easily mount to a lathe with a D1-3 spindle. Stud diameter is 9/16''. D is 54mm. L is 42mm.Concentricity is .0016''.. 125MM (D1) diameter.. Easily mount to a lathe with a D1-3 spindle.. Use with ER-40 collets. Supplied with a wrench.. D is 54mm. ~ L is 42mm..


HHIP 3901-5036 ER-40 Collet Chuck, 100 mm Diameter x 42 mm Height
By HHIP
In Stock
$112.80

mpn: 3901-5036, ean: 0769053088877,

4.4 out of 5 stars with 40 reviews
100MM Diameter ER-40 Collet Chuck ~ Mount to your choice of backplate to use on a lathe. ~ Can also be used as a fixture on a milling table. ~ Concentricity is . 0016''. ~ D1 is 100mm. ~ D is 72mm. ~ L is 42mm.Mount to your choice of back plate to use on a lathe. Can also be used as a fixture on a milling table. Concentricity is . 0016''.. Diameter is 100mm. Length is 42mm. B01LW9RJGE.


8" 4-Jaw Self-Centering Lathe Chuck top&Bottom Jaws w. D1-6 Adapter Plate-New
By CME
In Stock
$269.00

mpn: 0804D6-CME,

4.6 out of 5 stars with 60 reviews
8'' - 4 jaw self-centering lathe chuck with D1-6 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. 6pcs of hemlock studs and small screws included. PRECISION SEMI-STEEL BODIES. TOP QUALITY. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING. 2-5/8'' THRU HOLE DIAMETER Back mounting recess dia. 165mm Back mounting bolts circle dia. 180mm8'' 4-Jaw Self-Centering Lathe Chuck top&bottom jaws w. D1-6 adapter plate-new.


Hardinge R8 Round Smooth Small Hole Collet, 1/64" Hole Size
By Hardinge
In Stock
$84.13

mpn: 17570019000156,

4.9 out of 5 stars with 58 reviews
This Hardinge R8 round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 3/4 inch, a back bearing diameter of 15/16 inch, and an overall length of 4 inches. The collet has external right-hand 0.437 inch x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold


23pcs ER40 Metric Collet Set, collets 4mm - 26mm, 0.008mm TIR #ER40-SET23M-NEW
By CME
In Stock
$175.00

mpn: ER40-SET23M,

4.4 out of 5 stars with 46 reviews
DESCRIPTION: ''CNC Tooling'' Brand----The Best Quality on the Market----Sold Many Thousands to Distributors! 23 PCS PRECISION ER40 Metric COLLETS PER SET -------4mmTHRU 26mm BY 1mm step INCLUDING ONE OF EACH: 4,5 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26mm We also have the following sizes in stock: SAME BUSINESS DAY SHIPPING WHEN GETTING ORDER. Large Inventory! Same Day Shipping!23pcs ER40 metric collet set, collets 4mm - 26mm, 0.008mm TIR #ER40-SET23M-NEW.


Accusize Industrial Tools 12 Pc Er-32 Collet Set Plus 1 Pc R8 Bridgeport Shank Holder and a Wrench in Fitted Box, 0223-0974
By Accusize Industrial Tools
In Stock
$199.00

mpn: 0223-0974, ean: 0641799799050,

4.8 out of 5 stars with 58 reviews
Type: ER-32. Range: R8x4''. 12 pcs/set includes the following collet sizes: 3/32'', 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', and 3/4''Accurate to 0.0004''Unique self-releasing system eliminates sticking. Suitable for all milling and drilling operations.Flute holding capability for the highest concentricity and clamping power.Complete kits include: chuck holder, nominal size collets, non-slip spanner wrench, and caseSize:ER-32,Range:R8x4'', Ansi standard. Includ


Accusize Industrial Tools 5C 5'' Collet Chuck, Plain Back, for Lathe Machine, 0269-0010
By Accusize Industrial Tools
In Stock
$272.00

mpn: 0269-0010,

4.0 out of 5 stars with 9 reviews
AccusizeTools - 5C 5'' Collet Chuck Plain Back for Lathe Machine, 0269-0010 Please don't buy this item unless you are familiar with this type of product. Thanks. Outside Diameter: 5'' Plain Back, Recessed 3.740'' x 0.184'' Deep Can be sued on lathe and grinding machines Plain Back, have to choose proper back plate to connet with your machine Should be used with back plate (adapter) to connect with your specific lathe spindle Can use any size 5C Collet: Round collet :1/16 ~ 1-1/8''; Hex collet


HHIP 3900-5129 Hex ER-40 Collet Block
By HHIP
In Stock
$47.78

mpn: 3900-5129, ean: 0769053091549,

4.6 out of 5 stars with 46 reviews
HHIP Block dimensions are 1-3/4'' x 1-3/4'' x 3.2''. For fast set-ups on conk machines. For parallel, square or hex shapes as well as for cross hole drilling at 60, 90 or 120 degrees. Made of tool steel hardened and ground to 0.0005'' flatness, sureness and parallelism. May be used standing upright. Uses standard ER collets. 1-3/32'' through hole allows for long parts to be machined. ER nut included.Block dimensions are 1-3/4 x 1-3/4 x 3.2''. For fast set-ups on CNC machines. For parallel, squar


PanaVise 215 PV Jr. Exchangeable Mini Circuit Board Holder Head
By Panavise
In Stock
$29.99

mpn: 215, ean: 0729315215007,

4.1 out of 5 stars with 47 reviews
Exchangeable mini circuit board holder head for your PanaVise 200 Series vises. Designed for small-mini circuit boards up to 4.5 inches (114.3mm) wide. Perfect for Arduino or Raspberry PI boards.The ideal circuit board holder for over the edge component boards. Quick adjusting arms open to 4.5 inches (114.3mm) wide. Tilts, turns and rotates. Quick release spring tension lever for ease of board insertion or removal. Arms move freely for precise positioning.


HHIP 3900-1629 5C Expanding Collet, 0.750-1.437"
By HHIP
In Stock
$33.64

mpn: 3900-1629, ean: 0769053020167,

4.8 out of 5 stars with 52 reviews
5C Expanding Collet .750 - 1.437'' Size Range: 0.250'' - 1.937'' . Fits Any Standard 5-C Spindle. Concentricity Within .0005'' . Shoulder Widths Within .001''. Effective Expansion Up To .006''. Head : 1'' Length.Size .750-1.437'' (#3) Size Range: 0.250'' - 1.937''. Concentricity within .0005'' . Shoulder widths within .001''. Size Range: 0.250'' - 1.937'' .Effective expansion up to .006''. Fits any standard 5-C spindle. EASILY MACHINED.


Happybuy 5Pcs CAT40 Collet Chucks ER16 Tool Holder Set with Projection 2.76"-6" Mill Holder Balanced to 20000 RPM for CNC Engraving Machine Milling Lathe
By Happybuy
In Stock
$129.96

ean: 0601707144365,

4.2 out of 5 stars with 50 reviews
Product Description CAT40 ER16 chucks are widely used in industry fields. Each of our chucks is hardened and grounded to ensure its accuracy. Brand new with top quality, you can rest assured to buy. Our chuck adopts fully grounded flange and V-groove, thus making it easy to change tools. Maintenance frequencies for spindle and changer will also be reduced accordingly. V-flange CAT 40 chucks are produced to meet high speed spindle turning and industrial standard. Thorough cooling and anti-rust


Accusize Industrial Tools 7 Pc Er-11 Collet Set, Range from 1/32'' to 1/4'', 0223-0735
By Accusize Industrial Tools
In Stock
$62.00

mpn: 0223-0735,

4.1 out of 5 stars with 39 reviews
7Pcs ER11 chucks set includes the following collet sizes: 1/32'', 1/16'', 3/32'', 1/8'', 3/16'', 7/32'', and 1/4''Concentricity: 0.0004''Design affords highest gripping powerTrue double angle for better accuracyFor powerful gripping and parallel clamping7Pc ER11 chucks set includes the following collet sizes: 1/32'', 1/16'', 3/32'', 1/8'', 3/16'', 7/32'', and 1/4''. Concentricity: 0.0004''. Design affords highest gripping power. True double angle fo better accuracy. For powerful gripping and par


All Industrial 41213 | 3" 5C Step Collet
By All Industrial
In Stock
$31.30

mpn: 210-0103,

4.9 out of 5 stars with 30 reviews
Soft face.Our part # ALL-41213. For machining to specific requirements.. Head diameter: 3''. Thickness: 1-1/8''.


1/32~3/8" ER16 10 Piece Spring Collet Set (3900-5165)
By HHIP
In Stock
$104.94
$96.66
You Save: 8%

mpn: 3900-5165, ean: 0769053028248,

4.4 out of 5 stars with 9 reviews
HHIP ER-16 Collet is made of high grade tool steel. 1/32 to 9/32'' size range . Hardened and precision ground. Meets or exceeds federal specifications. Set includes 1 each of 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8''.1/32 TO 9/32''. Made of high grade tool steel.. Hardened and precision ground.. Meets or exceeds federal specifications.. Set includes 1 each of 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8''..


Collet Chuck, ER-32, 3" Diameter
By LittleMachineShop.com
In Stock
$130.25

mpn: 2532,

4.7 out of 5 stars with 52 reviews
This 3'' diameter ER-32 collet chuck mounts on the lathe spindle in place of the lathe chuck or can be used as a fixture on a milling table. ER collet chucks range in size from 3/32'' up to 13/16'' so you can run 25/32'' (the through hole on the lathe spindle is 0.800'') stock through the headstock of your mini lathe. The outside diameter of the collet chuck is 80 mm. It has a 55 mm registration diameter and mounts with three M6 bolts on a 66 mm bolt circle.Mounts on mini lathe spindle. Shorter


Intergrated CAT40 Keyless Drill Chuck for HAAS or Mazak CNC
By tpactools
In Stock
$95.00

mpn: TPACTOOLS, ean: 0710228988065,

4.4 out of 5 stars with 42 reviews
Intergrated CAT40 Keyless Drill Chuck for HAAS or Mazak CNCCAT40 and Drill are built together, it's one solid piece. Keyless Drill Chuck Capacity, 1/2'', and ll Jaws are Hardened. V-Flange CAT 40 is production balanced and meet standard industrial needs. Include a either HAAS or Mazak style pull stud, and ready to be used on those two machines. Drill chuck has very strong holding power..



Viewing Page 1 of 10

View more products in Workholding.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - libertydailynews.com. All Rights Reserved.