Push Fit Ball Nose - Page 6 Save up to 1%


Up to 1% off on Push Fit Ball Nose at Liberty Daily News, Page 6. Top brands include JW Winco. & JW Winco. Hurry! Limited time offers. Offers valid only while supplies last.



GN 817.2-NI Stainless Steel Lock-out Type Indexing Plunger with Long Knob, with Lock Nut, M12 x 1.5mm Thread Size, 22mm Thread Length, 25 Newton Spring Load End
By JW Winco
In Stock
$42.90

mpn: 817.2-6-9-CK-NI,

4.7 out of 5 stars with 30 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Stainless steel Threaded body. Stainless steel, ground and chemically nickel plated Plunger pin. Matte black glass fiber reinforced nylon plastic not


GN 817.2 Series Steel Lock-Out Type Indexing Plunger with Long Knob, Type C with Rest Position, with Lock Nut, M20 x 1.5mm Thread Size, 33mm Thread Length, 40 Newton Spring Load End
By JW Winco
In Stock
$45.95

mpn: 817.2-12-15-M20X1.5-CK,

4.7 out of 5 stars with 24 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Steel, black oxide finish Threaded body. Steel, hardened and ground Plunger pin. Matte black glass fiber reinforced nylon plastic, not removable Knob


GN 817.1 Series Steel Lock-Out Type Metric Size Indexing Plunger with Multiple Pin Lengths, with Lock Nut, M16 x 1.5mm Thread Size, 26mm Thread Length, 38 lbs. Spring Load End
By JW Winco
In Stock
$161.90

mpn: 817-10-12-M16X1.5-CK,

4.1 out of 5 stars with 57 reviews
GN 817.1 indexing plungers offer the following advantages: Two retracting strokes l1 per plunger diameter. Identical dimensions l2 for GN 817 and GN 817.1 series. When plunger is retracted the mechanism is partly shrouded. Defined thread length by an undercut at the end of the thread. Used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite p


GN 817.2-NI Stainless Steel Lock-out Type Indexing Plunger with Long Knob, with Lock Nut, M8 x 1.0mm Thread Size, 16mm Thread Length, 12.5 Newton Spring Load End
By JW Winco
In Stock
$29.84

mpn: 817.2-4-6-CK-NI,

4.6 out of 5 stars with 44 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Stainless steel Threaded body. Stainless steel, ground and chemically nickel plated Plunger pin. Matte black glass fiber reinforced nylon plastic not


GN 817.2 Series Steel Non Lock-Out Type Indexing Plunger with Long Knob, Type B without Rest Position, without Lock Nut, M8 x 1.0mm Thread Size, 16mm Thread Length, 12.5 Newton Spring Load End
By JW Winco
In Stock
$19.56
$19.36
You Save: 1%

mpn: 817.2-4-6-M8X1-B,

4.5 out of 5 stars with 21 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Steel, black oxide finish Threaded body. Steel, hardened and ground Plunger pin. Matte black glass fiber reinforced nylon plastic, not removable Knob.


GN 817.2 Series Steel Non Lock-Out Type Indexing Plunger with Long Knob, Type B without Rest Position, without Lock Nut, M8 x 1.0mm Thread Size, 16mm Thread Length, 12 Newton Spring Load End
By JW Winco
In Stock
$19.56
$19.36
You Save: 1%

mpn: 817.2-4-4-M8X1-B,

4.6 out of 5 stars with 17 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Steel, black oxide finish Threaded body. Steel, hardened and ground Plunger pin. Matte black glass fiber reinforced nylon plastic, not removable Knob.


GN 817.2 Series Steel Non Lock-Out Type Indexing Plunger with Long Knob, Type B without Rest Position, without Lock Nut, M20 x 1.5mm Thread Size, 33mm Thread Length, 40 Newton Spring Load End
By JW Winco
In Stock
$33.14

mpn: 817.2-12-15-M20X1.5-B,

4.5 out of 5 stars with 45 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Steel, black oxide finish Threaded body. Steel, hardened and ground Plunger pin. Matte black glass fiber reinforced nylon plastic, not removable Knob.


GN 817 Series Steel Non Lock-Out Type Inch Size Indexing Plunger with Multiple Pin Lengths and Pull Knob, Threaded Body, with Lock Nut, 5/8"-11 Thread Size, 1.02" Thread Length, Spring Load End 6.3 Pounds
By JW Winco
In Stock
$24.21

mpn: 817-8-12-5/8X11-BK,

4.1 out of 5 stars with 52 reviews
GN 817 indexing plungers offer the following advantages: Two retracting strokes l1 per plunger diameter Identical dimensions l2 for GN 817 and GN 817.1 series Defined thread length by an undercut at the end of he thread Type G with threaded spindle is for applications where a specific knob or special receptacle is required for operation. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Steel, black oxide finish threaded body. Steel, hardened and ground Plunger pin. Matte black


GN 722.2 Series Steel Type A Metric Size Square Spring Latches with Flange for Surface Mounting, Latch Position Right-Angled to Mounting Holes, Black Textured Finish, 14mm Item Diameter, 68mm Item Length
By JW Winco
In Stock
$28.12

mpn: 722.2-14-20-A-SW,

4.0 out of 5 stars with 12 reviews
GN 722.2 spring latches are used when the indexing pin needs to be retracted. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions. Flange has two holes for mounting that can accomodate metric DIN 933/931 hex cap screws or DIN 912 socket cap screws. GN 722.2 spring latches are designed for use in steel construction or locksmith shops where less precise positioning / locking is required. The dimensional tolerances are therefore chosen for cos


GN 617-NI Series Stainless Steel Non Lock-Out Type Metric Size Indexing Plunger with Plastic Pull Knob, without Lock Nut, M10 x 1.0mm Thread Size, 17mm Thread Length
By JW Winco
In Stock
$140.39

mpn: 617-5-M10X1-A-NI,

4.2 out of 5 stars with 31 reviews
Indexing plungers GN 617-NI are standard units for a wide range of indexing mechanisms. Type G or GK with threaded plunger end are for applications where a special knob to customer's request or own design is required, or for such cases where the spindle is linked directly to an operating mechanism. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Stainless steel threaded body. Stainless steel, chemically nickel plated plunger pin. Matte black glass fiber reinforced nylon plast


GN 617-NI Series Stainless Steel Non Lock-Out Type Inch Size Indexing Plunger with Stainless Steel Pull Knob, with Lock Nut, 3/8"-24 Thread Size, 0.67" Thread Length
By JW Winco
In Stock
$156.05

mpn: 617-5-3/8X24-AKN-NI,

4.6 out of 5 stars with 48 reviews
Indexing plungers GN 617-NI are standard units for a wide range of indexing mechanisms. Type G or GK with threaded plunger end are for applications where a special knob to customer's request or own design is required, or for such cases where the spindle is linked directly to an operating mechanism. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Stainless steel threaded body. Stainless steel, chemically nickel plated plunger pin. Stainless steel knob. Stainless steel lock nut


GN 617 Series Steel Non Lock-Out Type Metric Size Indexing Plunger with Threaded Spindle, with Lock Nut, M20 x 1.5mm Thread Size, 33mm Thread Length
By JW Winco
In Stock
$166.60

mpn: 617-10-M20X1.5-GK,

4.4 out of 5 stars with 48 reviews
Indexing plungers GN 617 are standard units for a wide range of indexing mechanisms. Type G or GK with threaded plunger end are for applications where a special knob to customer's request or own design is required, or for such cases where the spindle is linked directly to an operating mechanism. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Steel, black oxide finish threaded body. Steel, hardened plunger pin. Matte black glass fiber reinforced nylon plastic, not removable k


GN 613-NI Series Stainless Steel Metric Size Indexing Plunger with Fully Threaded Body and Threaded Spindle, without Lock Nut, M16 x 1.5mm Thread Size, 34mm Thread Leangth
By JW Winco
In Stock
$39.55

mpn: F96/G,

4.5 out of 5 stars with 18 reviews
GN 613-NI indexing plungers in stainless steel are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism. For an additional cost, a special installation tool for GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position


GN 613-NI Series Stainless Steel Metric Size Indexing Plunger with Fully Threaded Body and Threaded Spindle, without Lock Nut, M12 x 1.5mm Thread Size, 26mm Thread Leangth
By JW Winco
In Stock
$32.07

mpn: F95/G,

4.2 out of 5 stars with 45 reviews
GN 613-NI indexing plungers in stainless steel are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism. For an additional cost, a special installation tool for GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position


GN 613-NI Series Stainless Steel Metric Size Indexing Plunger with Fully Threaded Body and Threaded Spindle, without Lock Nut, M10 x 1.0mm Thread Size, 22mm Thread Leangth
By JW Winco
In Stock
$27.52

mpn: F94/G,

4.5 out of 5 stars with 31 reviews
GN 613-NI indexing plungers in stainless steel are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism. For an additional cost, a special installation tool for GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position


GN 613-NI Series Stainless Steel Metric Size Indexing Plunger with Fully Threaded Body and Threaded Spindle, with Lock Nut, M20 x 1.5mm Thread Size, 43mm Thread Leangth
By JW Winco
In Stock
$53.82

mpn: F97/GK,

4.6 out of 5 stars with 52 reviews
GN 613-NI indexing plungers in stainless steel are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism. For an additional cost, a special installation tool for GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position


GN 817.2-NI Stainless Steel Non Lock-out Type Indexing Plunger with Long Knob, without Lock Nut, M12 x 1.5mm Thread Size, 22mm Thread Length, 25 Newton Spring Load End
By JW Winco
In Stock
$35.61

mpn: 817.2-6-9-B-NI,

4.7 out of 5 stars with 47 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Stainless steel Threaded body. Stainless steel, ground and chemically nickel plated Plunger pin. Matte black glass fiber reinforced nylon plastic not


GN 817.2-NI Stainless Steel Non Lock-out Type Indexing Plunger with Long Knob, with Lock Nut, M8 x 1.0mm Thread Size, 16mm Thread Length, 12.5 Newton Spring Load End
By JW Winco
In Stock
$165.65

mpn: 817.2-4-6-BK-NI,

4.0 out of 5 stars with 36 reviews
GN 817.2 indexing plungers are identical to GN 817 but with a longer knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).Stainless steel Threaded body. Stainless steel, ground and chemically nickel plated Plunger pin. Matte black glass fiber reinforced nylon plastic not


GN 817.1 Series Steel Lock-out Type Inch Size Indexing Plunger with Multiple Pin Lengths, without Lock Nut, 5/16"-18 Thread Size, 0.63" Thread Length, 2.8 lbs. Spring Load End
By JW Winco
In Stock
$196.00

mpn: 817-4-6-5/16X18-C,

4.0 out of 5 stars with 54 reviews
GN 817.1 indexing plungers offer the following advantages: Two retracting strokes l1 per plunger diameter. Identical dimensions l2 for GN 817 and GN 817.1 series. When plunger is retracted the mechanism is partly shrouded. Defined thread length by an undercut at the end of the thread. Used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite p


GN 817.1 Series Steel Lock-Out Type Inch Size Indexing Plunger with Multiple Pin Lengths, Without Lock Nut, 5/16"-18 Thread Size, 0.63" Thread Length, 2.7 lbs. Spring Load End
By JW Winco
In Stock
$197.75

mpn: 817-4-4-5/16X18-C,

4.9 out of 5 stars with 13 reviews
GN 817.1 indexing plungers offer the following advantages: Two retracting strokes l1 per plunger diameter. Identical dimensions l2 for GN 817 and GN 817.1 series. When plunger is retracted the mechanism is partly shrouded. Defined thread length by an undercut at the end of the thread. Used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite p



Viewing Page 6 of 8

View more products in Spring Plungers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - libertydailynews.com. All Rights Reserved.