Browse Our Catalog

C-Clamps - Page 6 - Super Savings! Save up to 32%


Super Savings! Up to 32% off on C-Clamps at Liberty Daily News, Page 6. Top brands include Kant Twist, Armstrong Tools, Wright Tool, Bessey, ESAB, Wilton, Palmgren, HHIP, BlueCollar , Unknown, Specialty Products Company, Balance World Inc, IRWIN, Micro-Mark, & Strong Hand Tools. Hurry! Limited time offers. Offers valid only while supplies last.



6'' Max Opening Capacity, 4-1/2'' Throat Depth (Opened), Copper Plated Cantilever Clamp
6" Max Opening Capacity, 4-1/2" Throat Depth (Opened), Copper Plated Cantilever Clamp
By Kant Twist
In Stock
$41.81

mpn: K060TD,

4.4 out of 5 stars with 52 reviews
6'' Max Opening Capacity, 4-1/2'' Throat Depth (Opened), Copper Plated Cantilever ClampPrice For: Each Handle Style: T-Handle Maximum Opening Capacity (Inch): 6 Open Throat Depth (Inch): 4-1/2 Closed Throat Depth (Inch): 5-1/2 Jaw Material: High Tensile Steel Load Capacity (Lb.): 2000 Jaw Finish/Coating: Copper Plated Maximum Width (Inch): 10 Overall Length (Inch): 11 Screw Finish/Coating: Copper Plated.


Armstrong Tools 78-402 Extra Deep Throat Pattern C-Clamp
Armstrong Tools 78-402 Extra Deep Throat Pattern C-Clamp
By Armstrong Tools
In Stock
$43.49

mpn: 78-402, ean: 0000006978402,

4.3 out of 5 stars with 17 reviews
FeaturesParco-Lubrite finish.Frame is drop forged Hi-Ten carbon steel; all other parts are machined from Hi-Ten carbon steel.Yellow and orange are high visibility clamps.Screw Diameter 1/2''. Maximum Capacity 2''. Parco-Lubrite finish.. Style Standard Black.


Wright Tool 90105H 5-1/2-Inch Extra Heavy Service Forged C Clamps Test Load 23800 Pounds
Wright Tool 90105H 5-1/2-Inch Extra Heavy Service Forged C Clamps Test Load 23800 Pounds
By Wright Tool
In Stock
$183.95

mpn: 90105H, ean: 0076799714268,

4.6 out of 5 stars with 24 reviews
wright tool 5-1/2'' Extra Heavy Service Forged C-Clamps - Test Load 23,800 lbs.Size 5 1/2-Inch weight 13.00. Maximum opening 5 1/2-Inch minimum opening 0-Inch. Depth 3 1/8-Inch screw diameter 7/8-Inch. Test load 23,800 pounds weight per box 13 pounds. Frame forged with heat treated steel.


Bessey CDF410 10-Inch Black Oxide Spindle Drop Forged C Clamp
Bessey CDF410 10-Inch Black Oxide Spindle Drop Forged C Clamp
By Bessey
In Stock
$62.22
$43.66
You Save: 30%

mpn: CDF410, ean: 0788502014656,

4.8 out of 5 stars with 18 reviews
BESSEY C-CLAMP, DROP FORGED, 10 IN. X 5 3/8 (CDF410)Drop forged heat treated frames provides extra strength and higher clamping pressure. Black oxide extra hardened spindles and pads resist rust and corrosion.


Tweco 92051150: GC500 500A SR Ground Clamp Copper
Tweco 92051150: GC500 500A SR Ground Clamp Copper
By ESAB
In Stock
$77.29
$52.24
You Save: 32%

mpn: 92051150, ean: 0608246009254,

4.9 out of 5 stars with 24 reviews
Tweco ground clamp with an Amperage capacity of 500 a has a 2 - 5 1/4'' deep jaw opening and the 10'' clamp features a ballpoint thru 4/0 cable connection capacity.Maximum amperage: 500 amps. Cable size: #1 - 4/0. Material: copper. Jaw opening: 2 - 5 1/4 inch. Length is 10 inches.


WILTON 18 in. Regular Duty F-Clamp
WILTON 18 in. Regular Duty F-Clamp
By Wilton
In Stock
$61.05

mpn: 82586220, ean: 0731325228250,

4.4 out of 5 stars with 35 reviews
1800S-18, 18'' REGULAR DUTY F-CLAMPTaiwan.


Palmgren 9629230 Regular Duty Extra Deep Throat Black Oxide Spindles C-Clamp, 0-10''
Palmgren 9629230 Regular Duty Extra Deep Throat Black Oxide Spindles C-Clamp, 0-10"
By Palmgren
In Stock
$127.48

mpn: 9629230, ean: 0726896292304,

4.0 out of 5 stars with 48 reviews
Palmgren's high tech line of C-Clamps gives you performance and features in c-clamps that count. Built from state-of-the-art research, computer aided design, and new all steel spring tempered frame geometry - coupled with an advanced heat treating process creates c-clamps that provide a secure and accurate hold. palmgren's all steel clamps are cost effective, versatile, durable and long lasting.High strength, lower weight, greater throat depth and lifetime guarantee against breakage. Hardened st


HHIP 3402-0003, 4-1/8 L X 4-1/8 W X 3-1/16 H Precision V-Block & CLAMP Set
HHIP 3402-0003, 4-1/8 L X 4-1/8 W X 3-1/16 H Precision V-Block & CLAMP Set
By HHIP
In Stock
$155.58

mpn: 3402-0003, ean: 0769053011783,

4.2 out of 5 stars with 22 reviews
2-9/16 Capacity Precision V-Block & Clamp Set ~ 4-1/8'' L X 4-1/8'' W X 3-1/16'' H ~ Guaranteed square parallel within .0002''. ~ Hardened & ground to RC 58-60. ~ 90° Vee blocks. ~ Supplied in a matched pair. ~ Supplied with bolts and clamps in wooden case. ~ V-block minimum capacity is 9/32'' and maximum capacity is 2-9/16''.Guaranteed square parallel within .0002''. Hardened & ground to RC 58-60. 90° Vee blocks. Supplied in a matched pair. Supplied with bolts and clamps in wooden case.


4 Piece 6 Inch C-Clamp Set - Industrial Strength, Quality Iron C Clamps for Woodworking, Welding, and Building by Blue Collar Tools
4 Piece 6 Inch C-Clamp Set - Industrial Strength, Quality Iron C Clamps for Woodworking, Welding, and Building by Blue Collar Tools
By BlueCollar
In Stock
$49.03

ean: 0735641853202,

4.0 out of 5 stars with 34 reviews
4 - 6 Inch Polyurethane Coated,Iron C-Clamp C-Clamps are great for securely holding anything in place including; wood crafts, metal fabrications, and bench top tools!INDUSTRIAL STRENGTH C-CLAMP is made of heavy-duty iron with a machined, nickel coated screw for optimal durability during the messiest projects.. COATED SURFACE construction protects your clamps from moisture, preventing rust and corrosion from damaging your clamps. Blue Collar Tools C-Clamps will outlast uncoated clamps.. HIGH-QUA


Wilton Tools 86210 12'' Regular Duty F-Clamp
Wilton Tools 86210 12" Regular Duty F-Clamp
By Unknown
In Stock
$61.51
$49.21
You Save: 20%

mpn: 86210, ean: 0640026828129,

4.4 out of 5 stars with 41 reviews
The Wilton classic Series F-Clamps are among the first of their kind. With a timeless design, this Series is an industry favorite. A simple, no-frills construction means it simply gets the job done. Regular-duty F-Clamps feature a clamping force of 1800 lbs.Black oxide spindle resists wear and tear while impeding rust. Drop forged arm provides minimal flex under heavy work loads. Swivel pad centers on work piece for a sturdy hold. Sturdy tommy bar is engineered for durability and comfort. The wi


Kant Twist 421 Deep Throat Jaw Opening Clamp, 6'' Holding Size, 11'' Length x 10'' Width, 2000 lbs Holding Capacity
Kant Twist 421 Deep Throat Jaw Opening Clamp, 6" Holding Size, 11" Length x 10" Width, 2000 lbs Holding Capacity
By Kant Twist
In Stock
$91.70

mpn: 421, ean: 0711182103174,

4.1 out of 5 stars with 30 reviews
Deep throat clamps allow for a deeper grab on the clamped objects. Multi-purpose clamps combine the best features of ordinary ''C'' and parallel clamps. Free-floating jaws adjust to un-parallel surfaces. Will not ''walk off-center'' when pressure is applied against jaw, because there is no unsupported screw or loose pad. All clamps are of rugged construction. Plates are made of high tensile steel. Provides new freedom of movement. Eliminates distorting and twisting action of conventional clamps.


Specialty Products Company 40929 C-Clamp and Screw
Specialty Products Company 40929 C-Clamp and Screw
By Specialty Products Company
In Stock
$93.87

mpn: 40929, ean: 0082642409298,

4.9 out of 5 stars with 42 reviews
Specialty Products Company (SPC) 40929 C-Clamp and Screw For 40920 This tool was specifically designed to remove the original equipment ball joints on smaller cars such as Hondas and Acuras when installing SPC Performance's sliding ball joints. With this revolutionary design you can remove the ball joint from the front upper control arm without removing the arm from the vehicle, saving time and costs.Replacement part.


Wright Tool 90102 2-Inch Heavy Service Forged C Clamps with a Test Load of 7500 Pounds
Wright Tool 90102 2-Inch Heavy Service Forged C Clamps with a Test Load of 7500 Pounds
By Wright Tool
In Stock
$74.18

mpn: 90102, ean: 0076799714206,

4.6 out of 5 stars with 28 reviews
wright tool 2'' Heavy Service Forged C-Clamps - Test Load 7,500 lbs.Size 2-Inch weight 1.50. Maximum opening 2-Inch minimum opening 0-Inch. Depth 1-1/2-Inch screw diameter 1/2-Inch. Test load 7500 pounds. Weight per box 1 1/2 pounds.


6pc Locking Welding Clamp Set Locking C CLamp Flat Bill 2 Prong Pliers set New
6pc Locking Welding Clamp Set Locking C CLamp Flat Bill 2 Prong Pliers set New
By Balance World Inc
In Stock
$54.99

ean: 0304360469614,

4.0 out of 5 stars with 37 reviews
SET CONTAINS: 2 PC. 11'' LOCKING C CLAMPS WITH SWIVEL PADS DROP FORGED 11'' LONG 2 PC. 9'' FLAT BILL WELDING LOCKING CLAMPS DROP FORGED 9'' LONG 2 PC. 9'' WELDING LOCKING CLAMPS SET DROP FORGED 9'' LONG 2 PC. 11'' LOCKING C CLAMPS WITH SWIVEL PADS. DROP FORGED. 2 PC. 9'' FLAT BILL WELDING LOCKING CLAMPS. 2 PC. 9'' WELDING LOCKING CLAMPS SET.


Wilton 14870 Deep-Throat Steel Pipe Clamp Fixture
Wilton 14870 Deep-Throat Steel Pipe Clamp Fixture
By Wilton
In Stock
$83.60

mpn: 14870, ean: 0697203148709,

4.3 out of 5 stars with 54 reviews
Pipe clamp ideal for any application where deep reach is required. Parts made from heavy duty ductile iron for high durability. Backed by Wilton's lifetime warranty. Includes: Deep-Throat Steel Pipe Clamp Fixture (14870).Ideal for any applications where extra deep-reach is required.. Moveable and stationary parts are made of heavy-duty, ductile cast iron for added strength. Multiple disc clutch provides sliding jaws with instant adjustment, secure hold and quick release. 8-1/2 pound, 2-piece des


Palmgren 9629228 Regular Duty Extra Deep Throat Black Oxide Spindles C-Clamp, 0-8''
Palmgren 9629228 Regular Duty Extra Deep Throat Black Oxide Spindles C-Clamp, 0-8"
By Palmgren
In Stock
$104.57
$100.89
You Save: 4%

mpn: 9629228, ean: 0726896292281,

4.3 out of 5 stars with 20 reviews
Palmgren's high tech line of C-Clamps gives you performance and features in c-clamps that count. Built from state-of-the-art research, computer aided design, and new all steel spring tempered frame geometry - coupled with an advanced heat treating process creates c-clamps that provide a secure and accurate hold. palmgren's all steel clamps are cost effective, versatile, durable and long lasting.High strength, lower weight, greater throat depth and lifetime guarantee against breakage. Hardened st


IRWIN VISE-GRIP Original Locking C-Clamp, 11'', 19, Sold as 4 Pack
IRWIN VISE-GRIP Original Locking C-Clamp, 11", 19, Sold as 4 Pack
By IRWIN
In Stock
$99.99
4.6 out of 5 stars with 39 reviews
The IRWIN VISE-GRIP Original Locking C-Clamp features 4''-wide opening jaws for more versatility and the ability to clamp a variety of shapes with just one tool. Pressure and fit can be adjusted with the turn screw that stays adjusted for repetitive use. Constructed of high-grade, heat-treated alloy steel for maximum toughness and durability, the Original C-Clamp has the classic trigger release design that maintains maximum locking force where you need it. Backed by the IRWIN Lifetime Guarantee.


Toolmaker's Vice, 2-1/2 Inch Capacity
Toolmaker's Vice, 2-1/2 Inch Capacity
By Micro-Mark
In Stock
$49.99

mpn: 21134, ean: 0818305022357,

4.0 out of 5 stars with 48 reviews
Machinists and toolmakers always lock their work in a vise. Our vise is cast and ground tool steel. Stands flat on base or side and has vertical and horizontal V grooves in one jaw face for holding round stock. A heavy-duty, well made tool for a lifetime of use. 2-1/2 inch wide x 1-1/2 inch deep jaws. 2-1/2 inch capacity. Weighs over 5 lbs. Colors may vary.Cast and ground tool steel. Stands flat on base or side, has vertical and horizontal V grooves in one jaw face for holding round stock. Heavy


Bessey GRZC C-Grip Pincer 4.33In/3.15In, SILVER/BLACK
Bessey GRZC C-Grip Pincer 4.33In/3.15In, SILVER/BLACK
By Bessey
In Stock
$84.54
$83.87

mpn: GRZC, ean: 4008158009636,

4.9 out of 5 stars with 19 reviews
Bessey tool gmbh & Co. Kg, a German family-owned Company, was founded in 1889. Internationally recognized as a world-class steel maker, the Company first introduced their line of malleable cast iron bar clamps in 1936 and heat-treated, all steel L clamps in 1952.For step-over clamping from both sides. Space-saving design. Tried-and-true Bessey all-steel quality.


STRONG HAND 4-IN-1 CLAMP KIT~ 10-1/2'' 2400lbs ~ UM105P
STRONG HAND 4-IN-1 CLAMP KIT~ 10-1/2" 2400lbs ~ UM105P
By Strong Hand Tools
In Stock
$57.50
$45.10
You Save: 22%

mpn: Str-5849, ean: 0679352004105,

4.1 out of 5 stars with 9 reviews
SPECS FOR UM105P (other models/sizes available. Does NOT include the v-pad & extender block) The Only Sliding Arm Clamps in the industry with the removable/reversible clamp arm, and the threaded jaw hole for adding exclusive Strong Hand® accessories. The 4-IN-1 Clamp adapts to create a: Pipe Clamp, Spreader Clamp, and Step-Over Clamp. 1 Clamp...4 Applications.5-1/2'' Throat. 10-1/2'' Opening. 2400 lbs clamping pressure. 1-3/16'' x 9/16'' rail size. 3/8-16'' threaded hole.



Viewing Page 6 of 7

View more products in Workholding.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - libertydailynews.com. All Rights Reserved.